Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 2003 · 30 citations · 7 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsMaterials ChemistryThin FilmsIon-conducting MaterialsSemiconductor Thin FilmsThin Film Electrical PropertiesThin-film DepositionThin-film MaterialsBody-centered Cubic LatticeCritical ThicknessIon Beam IrradiationResistivity MeasurementSputter DepositionX-ray Diffraction Analysis
The properties of tantalum thin film prepared by ion beam sputtering with Xe ions (0.6–1.5 KV) have been investigated. β-Ta thin films with high resistivity (170 μΩ cm) on Si substrate were obtained without Cr underlayer. With Cr underlayer, however, a body-centered-cubic phase (bcc) α-Ta thin film with low resistivity (20 μΩ cm) has been successfully obtained at room temperature. The experimental results indicate that the Cr underlayer plays an important role in α-Ta formation and that the critical thickness of Cr is 20 Å. Properties of α-Ta are also influenced by Ta thickness and ion beam deposition process conditions. α-Ta with lower resistivity was achieved by using approximate beam energy of 1000 eV and beam current of 150 mA. X-ray diffraction analysis indicates that changes in resistivity can be attributed to changes in microstructure that is influenced by the ion beam conditions.
7
L. A. Clevenger, A. Mutscheller, J. M. E. Harper et al. · Journal of Applied Physics · 1992 · 180 citations
Natural Sciences, Materials Engineering, Materials Science +17