Journal of Applied Physics · 2013 · 14 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsChemical Vapor DepositionField-effect TransistorsMetal-oxide-semiconductor Field-effect TransistorsSemiconductor Device MaterialsSemiconductor SurfacesSurface PassivationCharge Carrier DensityMetal-organic Chemical Vapor DepositionPassivationPassivation LayersPassivation TreatmentsSurface ConductivitySurface Passivation LayersSurface Termination
Diamond surface channel field effect transistors were passivated with thin AlN layers grown by metal-organic chemical vapor deposition in order to improve the chemical stability of the surface-near p-type channel. Electrical characterization showed that the surface-near conductivity in the diamond is preserved during AlN overgrowth if the process temperature does not exceed 800 °C. However, the sheet carrier density is decreased by a factor of about 5 compared to the unpassivated hydrogen-terminated surface. A combination of TEM and XPS analysis showed that this effect is not induced by a partial modification of the surface termination or by a polarization of the AlN passivation. The preserved, but reduced surface-near conductivity in the diamond can however be explained by a hydrogen double bond between the diamond and the AlN film. Field-effect transistor structures fabricated on the passivated diamond substrates showed stable operation up drain-source voltages to −70 V and might therefore be promising candidates for future high-voltage applications.
12
Origin of Surface Conductivity in Diamond
Florian Maier, Marc Riedel, B.F. Mantel et al. · Physical Review Letters · 2000 · 937 citations