Journal of Agricultural and Food Chemistry · 1997 · 14 citations · 4 references
AgricultureChemical EngineeringFood ScienceFood EngineeringFood PackagingFood SafetyFood ContaminationOrganic Contaminant RemediationPackaging MaterialsPackaging SafetyPlastic PackagingPlastics RecoveryChemical Contamination From PackagingContamination From ReuseFood Contamination From PackagingPackaging ContaminantsPackaging Material ContaminationPlastic ContaminationRecycled Packaging MaterialsRecycling Processes
Experiments were performed to evaluate the significance of potential contamination of postconsumer poly(ethylene terephthalate) (PETE) on the reuse of such material as food packaging. The protocol in the FDA document Points to Consider for the Use of Recycled Plastics in Food Packaging: Chemistry Considerations (FDA, 1992) that are routinely employed to evaluate recycling processes for removal of potential contaminants were used. Two-liter PETE bottles were contaminated separately with benzene, butyric acid, malathion, and lindane at 40 °C for 2 weeks, rinsed, dried, and cut into small chips. The contaminated chips were washed at 73 °C, dried with an IR lamp, and extracted using 8% aqueous ethanol solution at 49 ± 1 °C for 30 days. After 30 days, approximately 60% of the benzene, 30% of the butyric acid, and 30% of the lindane had migrated from the contaminated chips into the 8% ethanol solution, but no measurable concentration of malathion was observed. Keywords: Reused PETE; migration; residual contaminants; food simulant
4
Polyethylene terephthalate bottles (PRBs): A health and safety assessment
V.J. Feron, J. Jetten, N. de Kruijf et al. · Food Additives & Contaminants · 1994 · 40 citations
Address Change for ES&T Manuscript
Environmental Science & Technology · 1995 · 11 citations