Japanese Journal of Applied Physics · 1997 · 18 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsSemiconductor Device MaterialsSemiconductor InterfacesSemiconductor PhysicsSilicon MaterialsSurface OxidationX-ray Photoelectron SpectroscopyCapacitance-voltage CharacterizationCapacitance-voltage MeasurementsCapacitance-voltage RelationsFilm ThicknessNitridationSilicon DioxideSilicon NitrideThermal Annealing
Si was oxynitrized (and/or nitrized) in both helicon-wave-excited and inductively-coupled N 2 or N 2 +Ar mixed plasma. Fairly good capacitance-voltage ( C – V ) characteristics were obtained after post-thermal annealing at 400°–500°C for 30 min in nitrogen ambient. X-ray photoelectron spectroscopic (XPS) measurements showed that chemically stoichiometric Si oxynitride, Si 2 N 2 O, was uniformly formed throughout the whole film thickness at a flow-rate ratio of N 2 of 80% in a N 2 + Ar mixed plasma (N 2 :Ar = 8:2). On the other hand, SiO 2 was formed at the outer surface while Si 2 N 2 O was formed in the middle portion of the film and near the interface between the grown film and Si, when the flow-rate ratio of N 2 was less than about 80%. The growth rate and the degree of “nitridation" were maximum at flow-rate ratio of N 2 of 80%. The leakage current in the film was found to be mainly the Fowler-Nordheim-type tunneling current.
12
Plasma production by helicon waves
T. Shoji, Y. Sakawa, S. Nakazawa et al. · Plasma Sources Science and Technology · 1993 · 172 citations