Review of Scientific Instruments · 2013 · 40 citations · 39 references
EngineeringMaterials ScienceMechanical EngineeringMicroelectromechanical SystemsMicrofabricationSensorsAtomic Force MicroscopyForce SensingForce SensorsMicroelectromechanical SensorsPiezoelectric ActuationScanning Probe MicroscopyCantilever Beam DeflectionDeflection MeasurementDynamic RangeFeedbackFeedforward Control SystemsSelf-sensing ActuationSurface Charge MeasurementTapping Mode Atomic Force Microscopy
This work proposes a novel self-sensing tapping-mode atomic force microscopy operation utilizing charge measurement. A microcantilever coated with a single piezoelectric layer is simultaneously used for actuation and deflection sensing. The cantilever can be batch fabricated with existing micro electro mechanical system processes. The setup enables the omission of the optical beam deflection technique which is commonly used to measure the cantilever oscillation amplitude. Due to the high amount of capacitive feedthrough in the measured charge signal, a feedforward control technique is employed to increase the dynamic range from less than 1 dB to approximately 35 dB. Experiments show that the conditioned charge signal achieves excellent signal-to-noise ratio and can therefore be used as a feedback signal for atomic force microscopy imaging.
39
G. Binnig, C. F. Quate, Ch. Gerber · Physical Review Letters · 1986 · 14.4K citations · Full text
Novel optical approach to atomic force microscopy
Gerhard Meyer, Nabil M. Amer · Applied Physics Letters · 1988 · 1.3K citations