Use of nanoporous columnar thin film in the wafer-level packaging of MEMS devices

Abstract

This paper presents a new packaging technology that uses a nanoporous columnar thin film to seal microelectromechanical system (MEMS) devices at the wafer level. In the proposed packaging process, the processing temperature is 350 °C. The process is relatively inexpensive compared to wafer level packaging processes, because the wafer-bonding step is eliminated and the die size is shrunk. In the suggested approach, a sputtered columnar thin film at room temperature forms vertical nanopores as etch holes, and an air cavity is formed by the removal of a sacrificial layer through the nanopores in the columnar membrane. Subsequent hermetic vacuum packaging of the cavity is achieved by depositing thin films over the membrane under low pressure. The hermeticity of the packaging was verified by using an optical surface morphology microscope to measure the deflection change of the sealing membrane before and after breaking of the vacuum through an interconnected membrane. The long-term hermeticity was monitored by measuring the maximum central deflection of the PECVD sealing layer over a period of 170 days. The precise pressure (0.7 Torr) and short-term (30 days) pressure change inside the cavity were measured by encapsulated Ni Pirani gauges, representing packaged freestanding MEMS devices.