A low-overhead fault tolerance scheme for TSV-based 3D network on chip links

Igor Loi, Subhasish Mitra, Thomas H. Lee, Shinobu Fujita, Luca Benini

2008 · 146 citations · 15 references

Concepts

TL;DR

Three‑dimensional die stacking with Through‑Silicon Vias enables many vertical interconnects, but low TSV yield hampers large‑scale 3D stack designs. The paper proposes a defect‑tolerance technique for TSV‑based multi‑bit links that leverages redundancy. This technique is tailored for three‑dimensional network‑on‑chip links, providing efficient and effective redundancy. Simulations show yield increases from 66 % to 98 % with only a 17 % area cost on a vertical link, adding just 2.1 % to total switch area and imposing minimal design and test overhead.

Abstract

Three-dimensional die stacking integration provides the ability to stack multiple layers of processed silicon with a large number of vertical interconnects. Through Silicon Vias (TSVs) provide a promising area- and power-efficient way to support communication between different stack layers. Unfortunately, low TSV yield significantly impacts design of three-dimensional die stacks with a large number of TSVs. This paper presents a defect-tolerance technique for TSVs-based multi-bit links through an efficient and effective use of redundancy. This technique is ideally suited for three-dimensional network-on-chip (NoC) links. Simulation results demonstrate significant yield improvement, from 66% to 98%, with a low area cost (17% on a vertical link in a NoC switch, which leads a modest 2.1% increase the total switch area) in 130 nm technology, with minimal impact of VLSI design and test flows.

References

15