Microfabricated ion accelerator grid design issues - Electric breakdown characteristics of silicon dioxide insulator material

Juergen Mueller, D. Pyle, Indrani Chakraborty, Ronald Ruiz, William C. Tang, R.G. Lawton

34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · 1998 · 11 citations · 9 references

Concepts

Abstract

Low-temperature (LTO) chemical vapor deposited (CVD) silicon dioxide was investigated for use as an insulator material in microfabricated ion engine accelerator grids. Both substrate (bulk) as well as surface breakdown experiments were performed. Oxide thicknesses for substrate breakdown tests ranged between 1 pm and 3.9 pm. Surface breakdowns were performed over gap distances ranging between 5 pm and 600 pm. Substrate breakdown strengths up to 600-700 V/pm were measured, allowing for maximum stand-off voltages o f 2500 V. A slight decrease in breakdown field strength for larger thicknesses was observed. Temperature effects on ubstrate breakdown field strengths do exist, however, are s m a l l. Only a 15 % drop in breakdown field strength was noted at 400 C vs. strengths measured a t room temperature. Surface breakdown field strengths ranged as high as 140 V/pm, leading t o a stand-off capability of 700 V over a 5 pm oxide film. Tests were performed to study t h e influence of silicon oxide surface morphology was found.

References

9