FUNGAL RESISTANCE AND PHYSICO-MECHANICAL PROPERTIES OF CINNAMON OIL- AND CLOVE OIL-TREATED RUBBERWOOD PARTICLEBOARDS

Abstract

YINGPRASERT W, MATAN N, CHAOWANA P 8c MATAN N. 2015. Fungal resistance and physico-mechanical properties of cinnamon oiland clove oil-treated rubberwood particleboards. In order to protect rubberwood particleboards against moulds (Aspergillus sp. and Trichothecium sp.) and fungi (Gloeophylum sp. and Trametes sp.), application of essential oil (cinnamon or clove oil) as an antifungal agent was investigated. A solution of each essential oil in ethanol was sprayed onto rubberwood particles during a glue-particle blending process to achieve various concentrations of 0 to 3% (by mass of dried particles) . Chemical compounds of essential oil deposited in the finished board after hot processing were investigated by gas chromatographymass spectrometry analysis. Besides mould and decay resistance, physical and mechanical properties of the particleboards were examined. Cinnamaldehyde (1.8 pg gf1) and eugenol (5.2 pg g4) were detected in boards treated with 3% cinnamon oil and clove oil respectively. A complete protection against growth of Aspergillus sp. and Trichothecium sp. on the boards was extended from less than 1 week till 9 weeks at 25 °C and 100% relative humidity. Percentage mass loss caused by Trametes sp. and Gloeophylum sp. was also reduced to 5%. Essential oil treatment reduced equilibrium moisture content and thickness swelling without affecting water absorption and bending properties of particleboards. Internal bond strength of particleboards remained unaffected by addition of cinnamon oil and clove oil up to 1.8%, above which a slight reduction was observed.