IEEE Microwave and Wireless Components Letters · 2005 · 21 citations · 10 references
EngineeringElectrical EngineeringMicroelectromechanical SystemsMicroelectronicsMicrofabricationElectrostatic ActuationMems CharacterizationMems DesignMems ReliabilityMems SwitchesRf MemsHigh-speed SwitchingInsertion LossMicroelectromechanical SwitchesMicroswitchesReturn LossRf Mems SwitchesRf Microelectromechanical SystemsSwitching Speed
We report a novel pull-up type radio frequency (RF) microelectromechanical system (MEMS) switch with no elastic deformation of the cantilever involved in the actuation. At a voltage of 4.5V, reliable actuations are achieved such that the movable lower contact pad is pulled up by the electrostatic force to make contact with the upper pad. At a frequency of 50GHz, an insertion loss of 0.5dB, a return loss of 12.4dB, and an isolation of 55dB are obtained from the switch. The measured transient times for switch-on and switch-off are 120 and 130ns, respectively. Compared to the MEMS switches reported thus far, the pull-up type switch shows the best switching speed and isolation characteristic at 50GHz.
10
Performance of low-loss RF MEMS capacitive switches
Charles L. Goldsmith, Zhimin Yao, S. Eshelman et al. · IEEE Microwave and Guided Wave Letters · 1998 · 428 citations