Journal of Applied Physics · 1989 · 38 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceInterface ScienceSemiconductor MaterialsSurface ScienceInterfacial PhenomenaInterfacial StabilityInterfacial ThermodynamicsSemiconductor InterfacesThin Film AdhesionWafer BondingDiffusivityInterfacial Oxide LayersInterfacial OxidesOxide Film StabilityOxide Interface StabilitySilicon DioxideSilicon WafersThin Oxide Layers
The stability of thin interfacial oxide layers between bonded silicon wafers is investigated experimentally and theoretically. For usual bonding temperatures around 1100 °C and typical times of a few hours, the oxygen diffusivity is not high enough to allow the oxide layer dissolution. For aligned wafers of the same orientation, the oxide layer instead tends to disintegrate in order to minimize the SiO2/Si interface energy. It is possible to stabilize a uniform interfacial oxide layer by rotationally misorienting the two wafers by an angle θ exceeding a critical angle, θ crit, estimated to be between 1° and 5°.
12
Wafer bonding for silicon-on-insulator technologies
J. B. Lasky · Applied Physics Letters · 1986 · 574 citations
Silicon-to-silicon direct bonding method
Masaru Shimbo, K. Furukawa, K. Fukuda et al. · Journal of Applied Physics · 1986 · 507 citations
Diffusivity of oxygen in silicon during steam oxidation
J. C. Mikkelsen · Applied Physics Letters · 1982 · 183 citations
G.R. Wolstenholme, N Jorgensen, P. Ashburn et al. · Journal of Applied Physics · 1987 · 173 citations