Crystal Research and Technology · 2006 · 20 citations · 5 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsMetallic MaterialsSemiconductor MaterialsAlloy DesignAlloysMetal MaterialsMetalsAlloying ElementsElectrical ResistivityHardnessMelting PointSoldering
Abstract The eutectic alloy Sn‐9Zn was considered as a potential alternative to lead‐tin solder alloys when compared with other solders. In this paper, ternary, quaternary and penternary additions of the elements Bi, Cu and In were added to the eutectic alloy as a trial to improve its properties. The results showed that, the penternary alloy has properties superior to those of the binary, ternary and quaternary alloys. The alloy of composition Sn‐9Zn‐1Bi‐2Cu‐2In has the most suitable properties as a candidate alloy for lead‐free solder. It has a lower melting point, 186°C, which is very close to that of Sn‐37Pb solder, a lower value of electrical resistivity, 16.5 μΩ.cm, compared with that of Sn‐37Pb (17 μΩ.cm), higher value of the Young's modulus, 47 GPa, compared with 45 GPa of Sn‐37Pb and a higher value of the Vickers hardness, 191 MPa, compared with 129 MPa of Sn‐37Pb eutectic alloy. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
5
Surface melting on small particles
Kevin F. Peters, Yip-Wah Chung, Jerome B. Cohen · Applied Physics Letters · 1997 · 99 citations
Mustafa Kamal, M. S. Meikhail, Abu Bakr El-Bediwi et al. · Radiation effects and defects in solids · 2005 · 11 citations
Natural Sciences, Materials Engineering, Materials Science +17