Direct Thermal Desorption−Gas Chromatography and Gas Chromatography−Mass Spectrometry Profiling of Hop (<i>Humulus lupulus</i>L.) Essential Oils in Support of Varietal Characterization

Abstract

The use of direct thermal desorption-gas chromatography-mass spectrometry (DTD-GC-MS) and DTD-GC-flame ionization detection (DTD-GC-FID) for characterization of hop essential oils is described. Four hop varieties (Nugget, Galena, Willamette, and Cluster) from the Yakima valley (Yakima, WA) 1998 harvest were analyzed by DTD-GC-MS and DTD-GC-FID methodology. Approximately 1 g of hops was needed for the analysis. Hop samples were prepared for GC-MS and/or GC-FID profiling in approximately 20 min. More than 100 volatile compounds have been identified and quantified for each hop variety. The results were found to be in good agreement with conventional steam distillation-extraction (SDE) data. A calibration curve for determination of essential oil content in hops by DTD-GC-FID has been generated. Quantitation of hop oil content by DTD-GC-FID was shown to be in good agreement with conventional SDE data. The recovery of key oil components valuable for varietal identification was demonstrated to be highly reproducible and characteristic of each variety analyzed when DTD-GC-FID was used for analysis.