IEEE Transactions on Industrial Informatics · 2023 · 14 citations · 12 references
EngineeringComputer ScienceManufacturing EngineeringComputational GeometryGeometric ModelingMachine VisionGeometry ProcessingMachiningPoint Cloud ProcessingSpatial RegistrationCoolingFilm CoolingGuide VanesIterative Closest PointMachining Error CompensationMachining ProcessesMachining TechnologyRegistration
The manufacture of film cooling holes on turbine guide vanes of an aeroengine suffers from the contour errors resulting from a casting process. It is therefore necessary to adjust positions and orientations of cooling holes for each vane. This article proposes an adaptive compensation machining method based on a combination of a principal component analysis (PCA) iterative closest point (PCA-ICP) registration method and an orthocenter mapping method. First, a registration is carried out between an ideal point cloud and a measured point cloud by a laser measurement machine to obtain a transformation matrix. Then, the exit center of a cooling hole is obtained by an orthocenter mapping method. Simulation results show that the machining errors of vanes can be improved from <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\pm$</tex-math></inline-formula> 0.1 to <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\pm$</tex-math></inline-formula> 0.03 mm. Machining tests show that with a combination of the PCA-ICP registration and orthocenter mapping methods, cooling holes can be drilled adaptively to meet the machining requirements.
12
The Hotter the Engine, the Better
John H. Perepezko · Science · 2009 · 1K citations
TEASER: Fast and Certifiable Point Cloud Registration
Heng Yang, Jingnan Shi, Luca Carlone · IEEE Transactions on Robotics · 2020 · 821 citations
David G. Bogard, Karen A. Thole · Journal of Propulsion and Power · 2006 · 820 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17