Food Science and Human Wellness · 2019 · 38 citations · 18 references
AgricultureFisheriesFood ScienceAquacultureFood EngineeringFood ProcessingFood DryingMoisture AnalysisMoisture Content AnalysisMoisture DeterminationConcentrationDryingDrying ConditionsDrying ProcessesDrying Temperature EffectsMoisture ContentSalt Concentration EffectsSalt Concentration Optimization
Drying is applied to lower the moisture content of fish to a level that can prevent the growth of mould and infestation of micro-organism and thus minimizes microbial degradation. The goal of this work was to optimize the process conditions during electrical oven drying of catfish. Moisture content (MC) was quantitatively investigated during the drying process of catfish sizes using response surface methodology (RSM) to obtain minimum moisture content. The independent process variables for the drying process were temperature (50–70 °C), product thickness (10–20 mm), salt concentration (0–20%) and drying time (480–600 min.). Two factorial interaction (2FI) regression model describing the effects of independent drying process variables on the moisture content was developed. The effects of temperature and drying time were more pronounced for MC than the thickness and salt concentration.The optimum conditions were found to be temperature = 63.43 °C, product thickness = 14.81 mm, salt concentration = 9.07% and drying time = 600 min. At these optimum conditions, moisture content was found to be 2.64% w.b. Validation of experimental results with the empirical model was evaluated using coefficient of correlation (R2) which was found for the model equation as, R2 = 0.994.
18
Design and Analysis of Experiments
Brett G. Amidan, Angela Dean, Daniel Voss · Technometrics · 2000 · 1.2K citations
Abbas Ostovan, Mehrorang Ghaedi, Maryam Arabi et al. · ACS Applied Materials & Interfaces · 2018 · 341 citations · Full text
Maryam Arabi, Mehrorang Ghaedi, Abbas Ostovan · ACS Sustainable Chemistry & Engineering · 2017 · 234 citations
Natural Sciences, Materials Engineering, Materials Science +17