IEEE Transactions on Components Packaging and Manufacturing Technology · 2018 · 32 citations · 28 references
EngineeringMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsPower ElectronicsDevice ReliabilityNanomechanicsSemiconductor Device MaterialsSemiconductor ReliabilitySinteringThin Film Mechanical PropertiesCurrent DensityDie AttachFast Recovery DiodesMechanical Properties Of Sintered MaterialsMetallizationShear Strength AnalysisSintering BehaviorX-ray Diffraction Analysis
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received much attention in attaching power dies due to its superior high-temperature reliability. This paper investigated the sintering properties of nanosilver film in double-side sintered power packages. X-ray diffraction results revealed that the size of nanosilver particles increased after pressure-free sintering. Compared with the pressure-free sintered nanosilver particles, the 5-MPa sintered particles showed a higher density. When increasing sintering pressure from 5 to 30 MPa, the shear strength of the sintered package increased from 8.71 to 86.26 MPa. When sintering at pressures below 20 MPa, the fracture areas are mainly located between the sintered Ag layer and the surface metallization layer on the fast recovery diode (FRD) die. The fracture occurs through the FRD die and the metallization layer on the bottom molybdenum substrate when sintering at 30 MPa.
28
John G. Bai, Ziyang Zhang, Jesus N. Calata et al. · IEEE Transactions on Components and Packaging Technologies · 2006 · 370 citations