Large-Area, Single-Layer Molybdenum Disulfide Synthesized at BEOL Compatible Temperature as Cu Diffusion Barrier

Chun‐Li Lo, Kehao Zhang, Ryan Scott Smith, Ketan Shah, Joshua A. Robinson, Zhihong Chen

IEEE Electron Device Letters · 2018 · 37 citations · 20 references

Concepts

Abstract

The scaling limit of conventional Cu diffusion barriers has become the bottleneck for interconnect technology, which in turn limits the IC performance. Sub-nm diffusion barrier is urgently demanded to maintain the interconnect resistivity for ultra-scaled Cu interconnects. However, with this thickness, the blocking capabilities of conventional Cu diffusion barriers are lost. In this letter, sub-nm Cu diffusion barrier is realized by single-layer molybdenum disulfide (MoS <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> ) grown at 400 °C using metal-organic chemical vapor deposition. MoS <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> is directly grown on dielectrics without transfer processes and the continuous coverage in a large area (>1 cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> ) is achieved. Its resistance to Cu diffusion is investigated by time-dependent dielectric breakdown (TDDB) measurements. Our results indicate that the MoS <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> barrier can efficiently suppress Cu diffusion and enhance dielectric lifetime significantly. Although a few challenges, including Cu adhesion to the MoS <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> surface and integration with the Damascene structure, have to be assessed before introducing this novel material to the back-end-of-line technology, our work lays the groundwork for further investigation.

References

20