2015 · 13 citations · 4 references
EngineeringComputer EngineeringElectrical EngineeringAgingMicroelectronicsSemiconductor DevicesCmos Circuit DesignComplementary Metal-oxide-semiconductor TechnologyDevice ReliabilityIntegrated Circuit DesignMixed-signal Integrated Circuit DesignTiming AnalysisBias Temperature InstabilityCmos ReliabilityDegradationHot Carrier EffectsHot Carrier InjectionHot-carrier DegradationReliability Degradation MechanismsStandard Cells
We propose an on-die aging monitor based on ring-oscillator (RO) which measures bias-temperature-instabilities (BTI) and AC hot-carrier-infection (HCI). The monitor consists of a symmetric RO (SRO) and an asymmetric RO (ASRO). The effect of NBTI and PBTI can be separated by focusing on the difference in sensitivity observed in SRO and ASRO under DC stress condition. In addition, the speed degradation caused by AC-HCI is monitored because unbalanced delay with long/short transition in ASRO has high sensitivity against AC-HCI under AC stress. A test chip including both SRO and ASRO using 2NAND standard cells is implemented in a 16 nm Fin-FET bulk CMOS technology. We observe that Vth shift due to PBTI measured from frequency degradation is 2 mV, which is still 1/10 of NBTI in Fin-FET technology. The measured AC-HCI shows almost half percentage of all aging factors. The aging monitor optimizes the design guard band (GB) in design phase and enables dependable system in high performance application LSIs.
4
Self-heating effect in FinFETs and its impact on devices reliability characterization
S. E. Liu, J. S. Wang, Ying-Ta Lu et al. · 2014 · 114 citations
Engineering, Electrical Engineering, Electronic Materials +15
Automotive low power technology for IoT society
T Yamauchi, Hiroyuki Kondo, Koji Nii · 2015 · 16 citations
Engineering, Automotive Engineering, Computer Engineering +17