IEEE Transactions on Computers · 2011 · 11 citations · 28 references
EngineeringComputer EngineeringElectrical EngineeringLow-power DesignMicroelectronicsSemiconductor DevicesBuilt-in Self-testDesign For TestabilityDevice ReliabilityLow-power Digital Circuit DesignSemiconductor ReliabilitySubthreshold Circuit DesignFault Detection ModelsLow-power System DesignSense Amplifier DesignSubthreshold Memory CircuitsSubthreshold OperationThreshold Voltage
Due to the increasing demand of an extra-low-power system, a great amount of research effort has been spent in the past to develop an effective and economic subthreshold SRAM design. However, the test methods regarding those newly developed subthreshold SRAM designs have not yet been fully discussed. In this paper, we first categorize the subthreshold SRAM designs into three types, study the faulty behavior of open defects and address decoders faults on each type of designs, and then identify the faults which may not be covered by a traditional SRAM test method. We will also discuss the impact of open defects and threshold-voltage mismatch on sense amplifiers under subthreshold operations. A discussion about the temperature at test is also provided.
28
Theoretical and practical limits of dynamic voltage scaling
Bo Zhai, David Blaauw, Dennis Sylvester et al. · 2004 · 424 citations
Engineering, Computer Engineering, Electrical Engineering +17
A 256kb Sub-threshold SRAM in 65nm CMOS
Benton H. Calhoun, Anantha P. Chandrakasan · 2006 · 231 citations
Engineering, Computer Engineering, Electrical Engineering +17