The AMP-Foot 2.0: Mimicking intact ankle behavior with a powered transtibial prosthesis

Pierre Cherelle, Arnout Matthys, Victor Grosu, Bram Vanderborght, Dirk Lefeber

2012 · 58 citations · 13 references

DOIFull text

Open access

Concepts

TL;DR

Most transtibial prostheses are passive, storing and releasing energy only from an elastic element, which limits push‑off compared to the extra muscular contribution of a healthy ankle. The authors aim to design the AMP‑Foot 2.0, a powered transtibial prosthesis that mimics intact ankle behavior. The design uses a low‑power actuator that operates over a longer duration, storing its output in elastic elements and releasing it for propulsion, targeting 100 % push‑off for a 75 kg subject at normal cadence on level ground.

Abstract

Almost all of the transtibial prostheses that are available on the market are purely passive devices. They store energy in an elastic element at the beginning of a step and release it at the end in order to move the body forward. The main problem with these prostheses is that only the energy that has been stored in the elastic element is used for the push-off, unlike for non-pathological ankles where the muscles provide extra energy. There are a few prostheses who use active components for this energy input. In this article, the authors propose a new design of an energy efficient, powered transtibial prosthesis to mimic intact ankle behaviour, the AMP-Foot 2.0. The main idea behind our research is to have the actuator work longer with a lower power rating while the produced energy is stored in elastic elements and released when needed for propulsion. The device is designed to provide 100% of push-off for a 75 kg subject walking at normal cadence on ground level.

References

13