IEEE Transactions on Electron Devices · 2012 · 16 citations · 16 references
EngineeringElectrical EngineeringElectronic MaterialsOptoelectronicsSemiconductor DevicesDetector TechnologyIonization ProcessesNoise In Electronic DevicesNoise In Semiconductor DevicesPhotodetectorsSemiconductor DetectorsAvalanche PhotodiodesElectron Impact IonizationElectron IonizationExcess NoiseIonizationNoise In PhotodetectorsNoise In PhotodiodesPhotodiodes
Photomultiplication and excess noise measurements have been undertaken on two 4H-SiC avalanche photodiodes (APDs) using 244-nm light and 325-nm light. The structures are APDs with separate absorption and multiplication regions having multiplication regions of 2.74 and 0.58 μm , respectively. Pure injection conditions in the thicker device permit the measurement of pure-hole-initiated photomultiplication and an excess noise factor. Ionization coefficients for both carrier types have been extracted from these data using a local model. The use of the excess noise factor to infer the value of the less readily ionizing coefficient α from pure hole injection measurements is more robust than direct extraction from mixed injection measurements. This is because mixed injection introduces uncertainty in the generation profile. We report a significant reduction of the electron ionization coefficient α at low fields. The more readily ionizing hole coefficient β remains very similar to prior work.
16
Semiconductor ultraviolet detectors
Manijeh Razeghi, Antoni Rogalski · Journal of Applied Physics · 1996 · 1.5K citations
Silicon carbide high-power devices
C.E. Weitzel, John W. Palmour, C.H. Carter et al. · IEEE Transactions on Electron Devices · 1996 · 441 citations