Electrochemical Migration on Electronic Chip Resistors in Chloride Environments

Daniel Minzari, Morten Stendahl Jellesen, Pia Wahlberg, Rajan Ambat

IEEE Transactions on Device and Materials Reliability · 2009 · 78 citations · 18 references

DOIFull text

Open access

Concepts

Abstract

Electrochemical migration behavior of end terminals on ceramic chip resistors (CCRs) was studied using a novel experimental setup in varying sodium chloride concentrations from 0 to 1000 ppm. The chip resistor used for the investigation was 10-k¿ CCR size 0805 with end terminals made of 97Sn3Pb alloy. Anodic polarization behavior of the electrode materials was investigated using a microelectrochemical setup. Material makeup of the chip resistor was investigated using scanning electron microscopy (SEM)/energy dispersive spectroscopy and focused-ion-beam SEM. Results showed that the dissolution rate of the Sn and stability of Sn ions in the solution layer play a significant role in the formation of dendrites, which is controlled by chloride concentration and potential bias. Morphology, composition, and resistance of the dendrites were dependent on chloride concentration and potential.

References

18