IEEE Journal of Solid-State Circuits · 1990 · 14 citations · 4 references
EngineeringComputer EngineeringElectrical EngineeringMemoryMicroelectronicsSemiconductor DevicesCmos Circuit DesignIntegrated Circuit DesignLeakage Power ReductionMemory DevicesMetal-oxide-semiconductor Field-effect TransistorsSubthreshold Circuit DesignGallopingLeakage-aware Memory DesignMemory Circuit DesignNon-volatile Memory DesignSubthreshold LeakageSubthreshold Leakage ReductionTemperature Dependence
A GaAs 1 K*4-kb SRAM designed using a novel circuit technology is described. To reduce the temperature dependence and the scattering of the access time, it was necessary to increase the signal voltage swing and to reduce the leakage current in access transistors of unselected memory cells. In the 4-kb SRAM, source-follower circuits were adopted to increase the voltage swing, and the storage nodes of unselected memory cells were raised by about 0.6 V to reduce the subthreshold leakage current in the access transistors. The 4-kb SRAM was fabricated using 1.0- mu m self-aligned MESFETs with buried p-layers beneath the FET regions. A maximum address access time of 7 ns and a power dissipation of 850 mW were obtained for the galloping test pattern at 75 degrees C. Little change in the address access time was observed between 0 and 75 degrees C.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
4
A GaAs 16-kbit static RAM using dislocation-free crystal
M. Hirayama, M. Togashi, Naoki Kato et al. · IEEE Transactions on Electron Devices · 1986 · 41 citations
A GaAs 4 kbit SRAM with direct coupled FET logic
M. Hirayama, M. Ino, Yutaka Matsuoka et al. · IEEE Journal of Solid-State Circuits · 1984 · 17 citations
Engineering, Computer Engineering, Electrical Engineering +17