ECS Journal of Solid State Science and Technology · 2015 · 15 citations · 26 references
EngineeringMaterials EngineeringMaterials ScienceInterface ScienceSurface EngineeringSurface ScienceAbrasive WearAtomic Force MicroscopyCoatingsSurface FinishingSurface ModificationThin Film AdhesionFriction Force MicroscopyOxide RemovalPolishingRemovalSilicon DioxideSlurriesSurface Force MeasurementsThin Oxide Films
A colloidal AFM-based method was used to understand the role of diallyldimethyl ammonium chloride (DADMAC) molecules in non-Prestonian silicon dioxide removal obtained using ceria-based slurries. A series of force-distance measurements between silicon dioxide films, polyurethane IC1000 polishing pad and ceria abrasives in liquid media with and without DADMAC molecules were made. It was shown that at 15 mM concentration, DADMAC molecules yield non-Prestonian behavior by interfering between ceria particles and the oxide film. The effects of the DADMAC additive on the removal rates of the oxide films and their corresponding coefficients of friction (COFs) values were also investigated. Finally, the correlation between AFM force measurements, removal rates and COF values measured during polishing are discussed. Interestingly, below a threshold COF value of ∼0.23 to 0.24, corresponding to a threshold down pressure of ∼2psi for both 15 mM and 25 mM DADMAC concentration, no oxide film removal was observed.
26
Chemical processes in glass polishing
Lee M. Cook · Journal of Non-Crystalline Solids · 1990 · 989 citations
Mechanism of polishing of SiO2 films by CeO2 particles
Tetsuya Hoshino, Y. Kurata, Yuuki Terasaki et al. · Journal of Non-Crystalline Solids · 2001 · 306 citations
Natural Sciences, Materials Engineering, Materials Science +14