High-performance poly-Si TFTs made by Ni-mediated crystallization through low-shot laser annealing

Soo Young Yoon, N. D. Young, P. J. van der Zaag, D. McCulloch

IEEE Electron Device Letters · 2003 · 19 citations · 12 references

Concepts

Abstract

High-performance polycrystalline silicon (poly-Si) thin-film transistors (TFTs) have been fabricated using metal-induced crystallization followed by laser annealing (L-MIC). Laser annealing after MIC was found to yield a major improvement to the electrical characteristics of poly-Si TFTs. At a laser fluence of 330 mJ/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , the field effect mobility increased from 71 to 239 cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> /Vs, and the minimum leakage current reduced from around 3.0×10/sup -12/ A/μm to 2.9×10/sup -13/ A/μm at a drain voltage of 5 V. In addition, the dependence of the TFT characteristics on the laser energy density was much weaker than that for conventional excimer laser annealed poly-Si TFTs.

References

12