IEEE Transactions on Industrial Electronics · 2005 · 57 citations · 13 references
EngineeringElectrical EngineeringPower ElectronicsProcess ControlRenewable Energy SystemsControl System DesignControl SystemsControl TheoryNonlinear ControlPulse-width ModulationVoltage RegulationControl Law DesignFeedback LinearizationNeutral-point-clamped ConvertersNonlinear Feedback LinearizationNonlinear State-space ModelsNonlinear State-space SystemsState-space Nonlinear ControlTotal Harmonic Distortion
This work presents the design and implementation of a nonlinear control strategy for a three-phase three-level neutral-point-clamped boost rectifier. The adopted control consists of nonlinear feedback linearization technique. The nonlinear state-space model of the rectifier was obtained in the dq0 reference frame. The input/output feedback linearization is then applied and the linearizing control law is derived. Therefore, the resulting model is linearized and decoupled in three independent subsystems. Afterwards, the stabilizing controllers are designed based on linear techniques to control line currents, output, and neutral point voltages. The control law is designed using Simulink/Matlab and applied to the converter via a 1.8-kHz pulsewidth modulator (PWM). Both control law and PWM signals are executed in real time using the DS1104 DSP of dSPACE. A 1.2 kW laboratory prototype is built for validation purposes. The proposed control law robustness is validated for diverse severe load and system parameter variations. It shows robust performance in terms of high power factor, low total harmonic distortion and output voltage ripples, small overshoot, and short settling time.
13
Adaptive control stability, convergence, and robustness
Bo Egardt · Automatica · 1993 · 2.7K citations