IEEE Transactions on Components and Packaging Technologies · 2003 · 61 citations · 12 references
EngineeringElectrical EngineeringMaterials EngineeringHeat TransferSemiconductor DevicesThermal AnalysisChip PackagingHeat Transfer AnalysisHeat Transfer ModelingPackaging EngineeringTemperature MeasurementThermal Properties Of MaterialsElectronics Thermal PackagingEmissivityInfrared ThermographyPackage CharacterizationSurface TemperatureThermal CharacterizationThermal ResistanceThermal Test Methodology
An effective and novel methodology that integrates infrared (IR) thermography measurement and a three-dimensional (3-D) finite element (FE) model is proposed for thermal characterization of packages in a steady state under a natural convection environment based on JEDEC specification . To perform surface temperature measurement using an IR thermometer, a black paint coating is applied on the surface of packages so as to calibrate the surface radiation. The associated emissivity is approximately assessed using a simple calibration experiment, and an appropriate thickness of the coating is determined. By using a typical 100-lead Thin Quad Flat package (TQFP) as the test vehicle, the proposed methodology is benchmarked by a thermal test die measurement in terms of the junction-to-ambient (J/A) thermal resistance and the chip junction temperature. To demonstrate the accuracy of the benchmarked data from the thermal test die measurement, a corresponding uncertainty analysis is performed. It is found that the worst possible uncertainty in the measured power, based on the specific power supply, is about 0.005 W and that of chip junction temperature measurement is about 0.78/spl deg/C. Additional studies are performed to evaluate the feasibility of the correlation models for convective heat transfer coefficients on typical TQFP packages. It turns out that for a small device such as the TQFP package, these correlation models are fairly reliable.
12
Convective Heat and Mass Transfer
W. M. Kays, J. H. Whitelaw · Journal of Applied Mechanics · 1967 · 4K citations · Full text
Experimental methods for engineers
Ann M. Anderson · Experimental Thermal and Fluid Science · 1994 · 3.4K citations
Public Health, Mechanical Engineering, Applied Mechanics +10
B. Chambers, Tien-Yu T. Lee · Journal of Heat Transfer · 1997 · 53 citations
Engineering, Computational Engineering, Mechanical Engineering +15