Farm‐scale production of fuel ethanol and wet grain from corn in a batch process

Abstract

The batch production of fuel grade ethanol and distillers' wet grain (wet solids) in a farm-scale process (1240-15,580 L/batch) is described. The employs yeast fermentation of amylase-treated corn mash and a two-stage distillation. Primary emphasis in this study was on the cooking, fermentation, and centrifugation steps. Without recycling, fermentation of the mash yield beers with 10.0-10.5% ethanol. Recycling of stillage supernatant at full, 75, or 50% strengths produced enriched mashes that after 48-h fermentation yielded beers with 5-;14% more ethanol. Recycling twice with full-strength supernatant at pH 7.0 increased the ethanol yield in the final beer 16.5%; however, the time to complete the final fermentation was extended form 48 to 72 h and salt buildup occurred. By recycling at pH 5.4, it was possible to avoid rapids salt buildup and obtain beers with 10.3-10.5% ethanol. Recycling resulted in increased levels of glucose, starch, crude protein, and fat in the beer and a reduced moisture content while the wet solids showed an increased starch content. Centrifugation after cooking or fermentation yield in the subsequently produced beer. Fermentation of a volume-resorted mash supernatant gave a beer with only 9.25% ethanol. Mash wet solids varied somewhat chemically from beer and stillage solids. An economic and energy balance analysis of various modes of plant operation are provided and plant considerations are suggested.