IEEE Transactions on Electron Devices · 1987 · 518 citations · 7 references
EngineeringElectrical EngineeringCircuit TheoryMicroelectronicsSemiconductor DevicesDevice CharacterizationDevice ModelingDevice SimulationIntegrated Circuit DesignMetal-oxide-semiconductor Field-effect TransistorsSemiconductor PhysicsCapacitanceCapacitance ModelingCharge StorageCircuit SimulationCompact ModelingField-effect Transistor SimulationGate-dependent Current-voltage BehaviorMetal-oxide-semiconductor Field-effect Transistor Modeling
GaAs FETs exhibit a large gate‑to‑source capacitance under normal operation, which becomes comparable to the gate‑to‑drain capacitance at zero drain‑to‑source voltage and reverses when the drain‑to‑source voltage is negative, causing the source to act like a drain. The model uses a simple interpolation formula linking square‑law and square‑root drain‑current behavior, along with charge‑storage based ac equations that treat the gate charge as a single function of Vgs and Vgd, enabling accurate simulation of capacitance variations. The resulting SPICE‑compatible GaAs FET model achieves about 1 % accuracy in dc drain‑current predictions and supports simulations of drain‑to‑source voltage reversal in pass‑gate circuits.
We have developed a GaAs FET model suitable for SPICE Circuit simulations. The dc equations are accurate to about 1 percent of the maximum drain current. A simple but accurate interpolation formula for drain current as a function of gate-to-source voltage connects the square-law behavior just above pinchoff and the square-root law for larger values of the drain current. The ac equations, with charge-storage elements, describe the variation of the gate-to-source and gate-to-drain capacitances as the drain-to-source voltage approaches zero and when this voltage becomes negative. Under normal operating conditions the gate-to-source capacitance is much larger than the gate-to-drain capacitance. At zero drain-to-source voltage both capacitances are about equal. For negative drain-to-source voltages the original source acts like a drain and vice versa. Consequently the normally large gate-to-source capacitance becomes small and acts like a gate-to-drain capacitance. In order to model these effect it is necessary to realize that, contrary to conventional SPICE usage, there are no separate gate-to-source and gate-to-drain charges, but that there is only one gate Charge which is a function of gate-to-source and gate-to-drain voltages. The present treatment Of these capacitances permits simulations-in which the drain-to-source voltage reverses polarity, as occurs in pass-gate circuits.
7
Modeling of emitter capacitance
H.C. Poon, H.K. Gummel · Proceedings of the IEEE · 1969 · 45 citations