Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2009 · 29 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceSurface EngineeringSurface ScienceThin FilmsAluminum OxidesEtching ProcessesSemiconductor SurfacesThin Film Surface MorphologyThin-film DepositionThin-film MaterialsAluminum NitrideChemical EtchingEtchingFilm MorphologyThin Film Surface CharacterizationThin-film MorphologyUnderlayersWet Chemical Etching
The influence of the surface morphology of a molybdenum underlayer on the crystallinity and etchability of reactively sputtered c-axis oriented aluminum nitride thin films was investigated. Atomic force microscopy, scanning electron microscopy, transmission electron microscopy, high resolution x-ray diffraction, and defect selective chemical etching were used to characterize the microstructure of the Mo and AlN films. 1000nm thick films of AlN with a full width at half maximum (FWHM) of the x-ray rocking curve ranging from 1.1° to 1.9° were deposited on 300nm thick Mo underlayers with a FWHM of around 1.5°. The Ar pressure during the Mo deposition had a critical effect on the Mo film surface morphology, affecting the structure of the subsequently deposited AlN films and, hence, their wet etching characteristics. AlN films deposited on Mo sputtered at a relatively high pressure could not be etched completely, while AlN films deposited on low pressure Mo etched more easily. Postdeposition etching of the Mo surface in Ar rf discharge prior to deposition of the AlN film was found to influence the formation of AlN residuals that were difficult to etch. Optimal rf plasma etching conditions were found, which minimized the formation of these residuals.
23
John A. Thornton · Annual Review of Materials Science · 1977 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +12
Inversion domains in AlN grown on (0001) sapphire
Jacek B. Jasiński, Z. Liliental‐Weber, Qing Paduano et al. · Applied Physics Letters · 2003 · 116 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +11