Journal of Dynamic Systems Measurement and Control · 2010 · 16 citations · 18 references
EngineeringMechanical EngineeringMechatronics EngineeringActuatorsRobot ControlRoboticsActuation SystemsActuator ControlFriction ModelingMotion ControlServo ActuatorsServo SystemsActuator SaturationActuator Saturation EffectsFriction CompensationOvershootPolesPosition ControlPrecision PositioningTrajectory Planning
This paper presents the design and implementation of a positioning system with a dc servomotor and ball-screw mechanism used to realize high-precision positioning over a wide travel range with nanometer level positioning error and near zero overshoot. Instead of the popular dual-model control strategy and friction compensation, a high-gain proportional-integral-derivative controller is used to realize a single-step point-to-point positioning. The controller parameters are obtained by placing closed-loop poles according to the macrodynamics of a ball-screw mechanism only to avoid identification of microdynamics and friction modeling. In order to suppress the overshoot caused by actuator saturation in long-stroke positioning, a trajectory planning method is applied to calculate the input of the closed-loop system. Experimental and simulation results demonstrate that single-step precision positioning responses to different size commands are achieved without producing any large overshoot. In point-to-point positioning from 100 mm down to 10 nm, the positioning error is within 2 nm and the response dynamics is satisfactory.
18
A new model for control of systems with friction
Carlos Canudas de Wit, Henrik Olsson, Karl Johan Åström et al. · IEEE Transactions on Automatic Control · 1995 · 3.6K citations · Full text
Karl Johan Åström, Tore Hägglund · Control Engineering Practice · 2001 · 1.4K citations