Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena · 1986 · 56 citations · 0 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsMicroelectronicsSemiconductor DevicesElectron Beam LithographyNoise In Electronic DevicesNoise In Semiconductor DevicesFabricationFocused Ion Beam LithographyFocused Ion Beam PatterningResist PatterningResist SensitivityShot NoiseShot Noise AnalysisThin Film Resist Processing
A bilevel resist process using P(SiSt90–CMS10) silicon containing resist as a top layer has been developed for Ga+ focused ion beam (FIB) lithography. A 100 nm linewidth pattern with 750 nm thickness has been demonstrated. Lithographic characteristics for 100 kV Ga+ FIB have been studied for PMMA positive resist and P(SiSt90–CMS10) negative resist. The results indicate that backscattering and proximity effects are negligible and that 100 kV Ga+ FIB resist sensitivity is about 100 times larger than that for 20 kV electron beam. Moreover, it has been observed that discontinuous lines, which may be caused by shot noise or by an oscillation at the end of the Taylor cone of Ga ion source, are produced at low dose for both PMMA and P(SiSt90–CMS10) resists.