Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2007 · 10 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceFunctional MaterialsMicrofabricationPolymer ChemistryPolymer FunctionalizationPolymer Thin FilmsSurface ModificationFlash Imprint LithographyFunctionalizationImprint LithographyPhotosensitive MaterialsPlanarization TechniquesSilicon Device MaterialsThermal StabilityThermal Stability Analysis
Step and flash imprint lithography (SFIL) is low cost, high resolution patterning process and has found its way into a multitude of front end of the line (FEOL) and back end of the line (BEOL) applications. SFIL-R, a reverse tone variant of SFIL, and imprintable dielectrics are examples of such applications, and both require the design of specialized, silicon-based materials. Polyhedral oligomeric silsesquioxane (POSS) liquids were modified through a dual functionalization strategy to introduce photosensitive acrylate and thermally curable benzocyclobutane (BCB) groups to the molecule. The optimal functional group ratio was observed to be 3:5 acrylate to BCB, and the result was an imprintable dielectric with good mechanical properties and minimal post-exposure shrinkage. Thermal gravimetric analysis (TGA) revealed good thermal stability with minimal mass loss under annealing conditions of 400°C for 2 hours. Si-14 was designed to be a non-volatile, etch-resistant planarization layer for SFIL-R application. A polydimethylsiloxane (PDMS) derivative was modified to introduce acrylate functional groups and side branching for photosensitivity and low viscosity, respectively. Characterization of the material showed ideal planarization characteristics - low volatility (0.77 Torr at 25°C), low viscosity (15.1 cP), and minimal post-exposure shrinkage (5.1%).