Chemistry of Materials · 2007 · 21 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceInorganic ChemistryMaterials ChemistryThin FilmsAtomic Layer DepositionChemical Vapor DepositionInorganic MaterialsThin-film DepositionThin-film MaterialsX-ray Photoelectron SpectroscopyAlumina Thin FilmsMetal-organic Chemical Vapor DepositionMetalorganic Chemical Vapor DepositionPrecursor ChemistryX-ray Diffraction Analysis
Thin films of praseodymium aluminate (PrAlO x ) and neodymium aluminate (NdAlO x ) have been deposited by liquid injection metalorganic chemical vapor deposition (MOCVD) and atomic layer deposition (ALD) using the bimetallic alkoxide precursors [PrAl(OPr i ) 6 (Pr i OH)] 2 and [NdAl(OPr i ) 6 (Pr i OH)] 2 . Auger electron spectroscopy showed that all the films were high purity, with no carbon detectable (est. detection limit ≈ 0.5 at %). X-ray diffraction showed that the PrAlO x and NdAlO x films remained amorphous up to temperatures of 900 °C. Films grown by ALD were all Pr- or Nd-deficient (Pr/Al = 0.54−0.71; Nd/Al = 0.30−0.42), but near-stoichiometric films of PrAlO x (Pr/Al = 0.76) and NdAlO x (Nd/Al = 0.87) were obtained by MOCVD at deposition temperatures of 500 and 450 °C, respectively. The electrical properties of the films were assessed using C − V and I − V on MOS capacitors. Post-metalization annealing (PMA) in forming gas was effective in reducing charge levels in all films. Following PMA, the dielectric properties of NdAlO x were superior to those of PrAlO x, MOSCs fabricated with NdAl x O y (Nd/Al = 0.87) and PrAlO x (Pr/Al = 0.76) showed leakage current densities below 7.5 × 10 - 10 A cm - 2 (κ ∼ 14) and 1 × 10 -6 A cm - 2 (κ ≈ 12), respectively.
23