Submicron Ferroelectric Capacitors Fabricated by Chemical Mechanical Polishing Process for High-Density Ferroelectric Memories

Yasushi Igarashi, Kouichi Tani, Masanori Kasai, Kinya Ashikaga, Toshio Ito

Japanese Journal of Applied Physics · 2000 · 17 citations · 4 references

Concepts

Abstract

Submicron ferroelectric capacitors were fabricated by a damascene process using chemical mechanical polishing (CMP). The fabricated capacitors consisted of SrBi 2 Ta 2 O 9 (SBT) film with top and bottom electrodes of IrO 2 films. The capacitor size was 0.8 µm in diameter, that is, 0.5 µm 2 in area. Damage by the fabrication process was not observed in electrical measurements, such as the dependence of remanent polarization on electric field and leakage current properties. The remanent polarization (2Pr) of 5 µC/cm 2 at the saturation voltage of 2 V is half that of a large capacitor because the SBT films were composed of single-crystal grains in the bismuth-layered perovskite structure and micro-crystals in many phases including pyrochlore. The crystallinity of the SBT films may be associated with the redistribution of Bi between the SBT thin films and the IrO 2 electrodes during the crystallization annealing of SBT.

References

4