An ultra-low on-resistance power MOSFET fabricated by using a fully self-aligned process

Daiju Ueda, Hiromitsu Takagi, G. Kano

IEEE Transactions on Electron Devices · 1987 · 57 citations · 6 references

Concepts

Abstract

An ultra-low on-resistance power MOSFET fabricated by use of a fully self-aligned process is demonstrated. The feature of the new process is that most of the processing steps, such as channel formation, gate definition, and contact-hole opening, are carried out through a single masking step. This permits a remarkable increase in packing density, and thereby conducts the reduction of the channel resistance. A gate width per unit area of 50 cm /mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> has been implemented by using the new process with a 4-µm-pitch layout rule. This value is at least four times larger than that of the conventional VDMOSFET. The experimentally fabricated device, which possesses a total gate width of 480 cm in a 3.8 mm × 4.0 mm chip, exhibited an on-resistance of 9 mΩ and a breakdown voltage of 30 V. The resulting on-resistance area product of 137 mΩ .mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> is the smallest value ever reported.

References

6