IEEE Journal of Photovoltaics · 2014 · 10 citations · 26 references
EngineeringElectrical EngineeringMaterials ScienceSemiconductor DevicesSemiconductor MaterialsThin FilmsNanoimprint LithographyPhotovoltaic MaterialsSemiconductor Device MaterialsSemiconductor Thin FilmsSolar Cell MaterialsSolar CellsAntireflection CoatingsContact ResistanceLight AbsorptionLight Absorption EnhancementSheet ResistanceSilicon Solar CellsSurface Topography ModificationThin-film Solar Cells
The integration of 2-D periodic nanopattern defined by nanoimprint lithography and dry etching into aluminum-induced crystallization-based polycrystalline silicon thin-film solar cells is investigated experimentally. Compared with the unpatterned cell, an increase of 6% in the light absorption has been achieved thanks to the nanopattern, which, in turn, increased the short-circuit current from 20.6 to 23.8 mA/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . The efficiency, on the other hand, has limitedly increased from 6.4% to 6.7%. We show using the transfer length method that the surface topography modification caused by the nanopattern has increased the sheet resistance of the antireflection coating (ARC) layer as well as the contact resistance between the ARC layer and the emitter front contacts. This, in turn, resulted in increased series resistance of the nanopatterned cell, which has translated into a decreased fill factor, explaining the limited increase in the efficiency.
26
Nanoimprint Lithography: Methods and Material Requirements
L. Jay Guo · Advanced Materials · 2007 · 1.8K citations · Full text
Hole–Mask Colloidal Lithography
Hasse Fredriksson, Yury Alaverdyan, Alexandre Dmitriev et al. · Advanced Materials · 2007 · 567 citations
Natural Sciences, Materials Engineering, Materials Science +15
Transparent Conducting Oxides—An Up-To-Date Overview
Andreas Stadler · Materials · 2012 · 439 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17