Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 1999 · 30 citations · 16 references
Natural SciencesMaterials EngineeringMaterials ScienceSurface ChemistrySurface EngineeringSurface ScienceAtomic Force MicroscopyEtching ProcessesRaman SpectroscopySurface CrystallographySurface ModificationSurface PhysicsDry EtchingEtch DamageEtchingIon Beam EtchingLattice DamageRaman ScatteringRaman SpectraSurface Etching
A nitrogen ion beam was used to etch the surface of CuInSe2 single crystals. This technique, applied to CuInSe2 for the first time, was studied with respect to surface damage production at various ion energies and was compared to commonly used argon ion sputtering. Raman scattering and atomic force microscopy were applied as characterization methods. We observed a stress induced redshift of the Raman mode for the argon etched samples which could be explained by tensile stress in the damaged layer. Nitrogen ion beam etching at an energy of 1000 eV causes a blue shift due to the increased lattice damage. Nitrogen ion beam etching at energies below 500 eV was found to produce the lowest degree of damage and the lowest surface roughness, as compared with mechanical polish or argon ion sputtering. Therefore, this method is suitable for dry etching and smoothing of CuInSe2.
16
Scott MacLaren, J. E. Baker, N. Finnegan et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 1992 · 148 citations
Ion beam milling of InP with an Ar/O2-gas mixture
W. Katzschner, A. Steckenborn, Ronny Löffler et al. · Applied Physics Letters · 1984 · 35 citations · Full text
Reactive ion beam etching of InP with N2 and N2/O2 mixtures
W. Katzschner, U. Niggebrügge, Ronny Löffler et al. · Applied Physics Letters · 1986 · 29 citations