Microelectromechanical deformable mirrors

Thomas G. Bifano, Julie A. Perreault, Raji Krishnamoorthy Mali, Mark N. Horenstein

IEEE Journal of Selected Topics in Quantum Electronics · 1999 · 180 citations · 6 references

Concepts

TL;DR

These devices correct time‑varying aberrations in imaging or beam‑forming applications. The authors introduce a new class of silicon‑based deformable mirrors. Each mirror consists of a flexible silicon membrane supported by an array of electrostatic parallel‑plate actuators, fabricated by conventional surface micromachining of polycrystalline silicon films, with a design strategy that reduces nonplanar topography to achieve nearly flat membranes. Real‑time optical aberration correction was achieved using a single mirror segment in a closed‑loop feedback system, though residual stress gradients produced undesirable mirror contours.

Abstract

A new class of silicon-based deformable mirrors is described. These devices are capable of correcting time-varying aberrations in imaging or beam forming applications. Each mirror is composed of a flexible silicon membrane supported by an underlying array of electrostatic parallel plate actuators. All structural and electronic elements were fabricated through conventional surface micromachining using polycrystalline silicon thin films. A layout and fabrication design strategy for reducing nonplanar topography in multilayer micromachining was developed and used to achieve nearly flat membrane surfaces. Several deformable mirrors were characterized for their electromechanical performance. Real-time correction of optical aberrations was demonstrated using a single mirror segment connected to a closed-loop feedback control system. Undesirable mirror contours caused by residual stress gradients in the membrane were observed.

References

6