Crystals · 2019 · 20 citations · 22 references
EngineeringElectrical EngineeringMaterials ScienceOptoelectronicsSemiconductor DevicesSemiconductor MaterialsSemiconductor Device MaterialsSemiconductor HeterostructuresSemiconductor LasersSemiconductor PhysicsWide Band Gap SemiconductorsWide-bandgap SemiconductorsCurrent DensityGallium Nitride (Gan) MaterialsHeterostructure DevicesNumerical SimulationPower OutputThreshold Current ReductionTunnel Junction LasersVertical-cavity Surface-emitting Lasers
In this study, we theoretically designed and experimentally fabricated an InGaN vertical-cavity surface-emitting laser (VCSEL) with a tunnel junction (TJ) structure. From numerical simulation results, the optical loss of the device can be reduced by a TJ structure. Additionally, the leakage current of the VCSEL with TJ structure was much smaller than that of the VCSEL with an Indium-Tin-Oxide (ITO) layer. We have been demonstrated that laser output performance is improved by using the TJ structure when compared to the typical VCSEL structure of the ITO layer. The output power obtained at 2.1 mW was enhanced by a factor of 3.5 by the successful reduction of threshold current density (Jth) from 12 to 8.5 kA/cm2, and the enlarged slope efficiency was due to less absorption in VCSEL with a TJ structure. Finally, the samples passed the high temperature (70 °C) and high operation current (1.5 × Jth) test for over 500 h.
22
Red, green and blue lasing enabled by single-exciton gain in colloidal quantum dot films
Cuong Dang, Joonhee Lee, Craig Breen et al. · Nature Nanotechnology · 2012 · 558 citations · Full text
Vertical-cavity surface-emitting lasers for data communication and sensing
Anjin Liu, P. Wolf, James A. Lott et al. · Photonics Research · 2019 · 273 citations