Publication | Closed Access
High-Performance Normally-OFF GaN MIS-HEMTs Using Hybrid Ferroelectric Charge Trap Gate Stack (FEG-HEMT) for Power Device Applications
58
Citations
23
References
2018
Year
Wide-bandgap SemiconductorEngineeringPower ElectronicsSemiconductor DeviceSemiconductorsElectronic DevicesInternal Electric FieldQuantum MaterialsPower Device ApplicationsElectrical EngineeringPhysicsBias Temperature InstabilityPower Semiconductor DeviceFe PolarizationMicroelectronicsCategoryiii-v SemiconductorApplied PhysicsGan Power DeviceFe Gate Stack
A GaN metal-insulator-semiconductor-high electron mobility transistor (HEMT) using hybrid ferroelectric charge trap gate stack (FEG-HEMT) is demonstrated for normally-OFF operation. The ferroelectric (FE) polarization increases the number of trapped charges in the HfON charge trapping layer, leading to high positive threshold voltage (V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> ) shift for the normally-OFF device. Besides, under the positive bias temperature instability (PBTI) test, the internal electric field induced by FE polarization causes smoother slope of the conduction band in FE gate stack, resulting in better V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> stability. With the proposed hybrid FE charge trap gate stack, the device exhibits a high V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> of +2.71 V at I <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Dh</sub> = 1μA/mm, a high maximum current density of 820 mA/mm and low on-resistance (R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ON</sub> ) of 11.1 Ω · mm. The FE device also shows good V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">th</sub> -temperature stability compared to the non-FE device results. Besides, a high current device with 40 A is also fabricated in this letter to demonstrate the feasibility of the proposed FEG-HEMT device for high power device application.
| Year | Citations | |
|---|---|---|
Page 1
Page 1