Electronics Letters · 2017 · 24 citations · 7 references
EngineeringMechanical EngineeringRobotics EngineeringActuatorsRobot DesignRoboticsActuator DesignBioinspired Robot DesignPiezoelectric ActuationPiezoelectric ActuatorsPiezoelectric MaterialsBendingBiomechanics Of Insect LocomotionDisplacementDragFlapping FlightGliding LocomotionInsect-inspired RobotsWing Flapping
A 165 mg coin‐size bionic water‐skating robot driven by piezoelectric (PZT) bending actuator is presented. The robot with light weight and elastic legs uses surface tension to keep itself on the water surface. The driving force produced by flapping wings enables it to glide easily due to tiny resistance coefficient of water surface. The robot consists of PZT bending actuator, four‐bar transmission structure, two flapping wings, four elastic legs and the body. The actuator bending at resonance frequency of 105 Hz achieves 346 μm displacement at the end of actuator at voltage of 280 V so that the flapping angle of the wings reaches 73° at that frequency. Tests show that, the maximum equivalent payload of robot is 830.6 mg, about five times of its own mass, before breaking the water surface, and the water drag when robot skates on the water surface is about 29 μN, 1.76% of its gravity. The maximum forward speed of the robot is measured as 151 mm/s.
7
Jumping on water: Surface tension–dominated jumping of water striders and robotic insects
Je‐Sung Koh, Eunjin Yang, Gwang-Pil Jung et al. · Science · 2015 · 419 citations
Towards Understanding Why a Superhydrophobic Coating Is Needed by Water Striders
Fangchang Shi, Jia Niu, Jinyuan Liu et al. · Advanced Materials · 2007 · 306 citations