Electrochemical and Solid-State Letters · 2010 · 10 citations · 17 references
Natural SciencesElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsMetal Oxide NanomaterialsNanowiresOxide SemiconductorsP-n JunctionsSemiconductor Device MaterialsSemiconductor NanomaterialsCurrent DensityJunction Ideality FactorNanowire HeterojunctionsPhotoluminescencePhotoluminescence SpectroscopySemiconductor NanowiresSurface DefectsSurface Defects Characterization
This study investigated ZnO nanowires, grown by different solutions of zinc nitrate and zinc acetate, using scanning electron microscopy, room-temperature photoluminescence, and X-ray photoelectron spectroscopy. ZnO grown by zinc nitrate had thinner nanowires, with the average diameter being reduced by about five times, than that grown by zinc acetate. Fewer surface defects and better electrical performance were obtained in zinc acetate-ZnO. The turn-on voltage and ideality factor were reduced from 2.2 to 2.0 V and 3.7 to 2.14, respectively, for the diodes grown by zinc nitrate and zinc acetate. Leakage current density was also decreased by about 1 order under 4 V reverse-bias voltage.
17
Defects in ZnO Nanorods Prepared by a Hydrothermal Method
K. H. Tam, C. K. Cheung, Y. H. Leung et al. · The Journal of Physical Chemistry B · 2006 · 758 citations
Natural Sciences, Materials Engineering, Materials Science +17
Recent Advances in ZnO-Based Light-Emitting Diodes
Yong‐Seok Choi, Jang‐Won Kang, Dae‐Kue Hwang et al. · IEEE Transactions on Electron Devices · 2009 · 374 citations