ACS Catalysis · 2011 · 164 citations · 47 references
Natural SciencesChemistryMaterials ScienceMaterials ChemistryNanomaterialsNanotechnologyAtomic Layer DepositionCatalyst PreparationCatalyst SynthesisCatalytic MaterialsMetal Oxide NanomaterialsSupported CatalystsCatalytic NanomaterialsCatalytic Surface NanostructuresHydrocarbon CombustionHydrothermal SynthesisMetal Oxide CatalystsMetal Oxide NanocatalystsNanoparticle CatalystsNanostructured Catalysts
Pt/SrTiO 3 shows promise as a low temperature hydrocarbon combustion catalyst for automotive applications. In this study, SrTiO 3 nanocuboid supports were synthesized using sol-precipitation coupled with hydrothermal synthesis, and platinum was deposited on the nanocuboids with 1, 3, and 5 cycles of atomic layer deposition (ALD). The platinum particles have a highly uniform distribution both before and after reaction testing, and range from 1 to 5 nm in size, depending upon the number of ALD cycles. These materials have a >50 °C lower light-off temperature for propane oxidation than a conventional Pt/Al 2 O 3 catalyst, turn over frequencies up to 3 orders of magnitude higher, and show improved resistance to deactivation. The increased activity is attributed to the stabilization of a Pt/PtO core/shell structure during operating conditions by the strong epitaxy between the Pt and the SrTiO 3 support.
47
Ronald M. Heck, Robert J. Farrauto · Applied Catalysis A General · 2001 · 668 citations
Atomic Layer Deposition of Platinum Thin Films
Titta Aaltonen, Mikko Ritala, Timo Sajavaara et al. · Chemistry of Materials · 2003 · 391 citations
Promising Catalyst for Auto Exhaust
W. F. Libby · Science · 1971 · 366 citations