A Method for the Autonomous Control of Lower Limb Exoskeletons for Persons With Paraplegia

Hugo Quintero, Ryan J. Farris, Michael Goldfarb

Journal of Medical Devices · 2012 · 94 citations · 15 references

Concepts

TL;DR

Computer‑controlled lower‑limb orthoses are being developed to restore sitting, standing, and walking in paraplegic patients, requiring a safe, reliable, and intuitive control framework that enables autonomous movement selection. This study presents a control method that allows paraplegic users to initiate sitting, standing, and walking movements through postural cues captured by the device. The method comprises a user interface and control architecture implemented on a powered orthosis and evaluated on a T10 complete paraplegic subject. Experimental results and a demonstration video show that the architecture enables the subject to independently and appropriately control sitting, standing, and walking.

Abstract

Efforts have recently been reported by several research groups on the development of computer-controlled lower limb orthoses to enable legged locomotion in persons with paraplegia. Such systems must employ a control framework that provides essential movements to the paraplegic user (i.e., sitting, standing, and walking), and ideally enable the user to autonomously command these various movements in a safe, reliable, and intuitive manner. This paper describes a control method that enables a paraplegic user to perform sitting, standing, and walking movements, which are commanded based on postural information measured by the device. The proposed user interface and control structure was implemented on a powered lower limb orthosis, and the system was tested on a paraplegic subject with a T10 complete injury. Experimental data is presented that indicates the ability of the proposed control architecture to provide appropriate user-initiated control of sitting, standing, and walking. The authors also provide a link to a video that qualitatively demonstrates the user's ability to independently control basic movements via the proposed control method.

References

15