Design, Performance, and Energy Consumption of eDRAM/SRAM Macrocells for L1 Data Caches

Abstract

SRAM and DRAM have been the predominant technologies used to implement memory cells in computer systems, each one having its advantages and shortcomings. SRAM cells are faster and require no refresh since reads are not destructive. In contrast, DRAM cells provide higher density and minimal leakage energy since there are no paths within the cell from Vdd to ground. Recently, DRAM cells have been embedded in logic-based technology (eDRAM), thus overcoming the speed limit of typical DRAM cells. In this paper, we propose a hybrid n-bit macrocell that implements one SRAM cell and n-1 eDRAM cells. This cell is aimed at being used in an n-way set-associative first-level data cache. Architectural mechanisms (e.g., special writeback policies) have been devised to completely avoid refresh logic. Performance, energy, and area have been analyzed in detail. Experimental results show that using typical eDRAM capacitors, and compared to a conventional cache, a 4-way set-associative hybrid cache reduces both energy consumption and area up to 54 and 29 percent, respectively, while having negligible impact on performance (less than 2 percent).