Metal-to-metal antifuses with very thin silicon dioxide films

G. Zhang, Ertao Hu, Peifeng Yu, S. Chiang, E. Hamdy

IEEE Electron Device Letters · 1994 · 23 citations · 7 references

Concepts

Abstract

Antifuse samples with very thin insulating oxide were fabricated using a technique of two-step PECVD oxide deposition. Dielectric strength as high as 13 MV/cm was obtained for our samples. Defect density and uniformity have been improved in this way. The on-state resistance of the programmed antifuses shows a stronger dependence on the oxide thickness when it was programmed at the lower current than when it was programmed at the higher current.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

References

7