IEEE Sensors Journal · 2010 · 41 citations · 15 references
EngineeringMechanical EngineeringHeat TransferSensorsThermal AnalysisFlow SensorsHeat Transfer AnalysisHeat Transfer ModelingTemperature MeasurementTemperature SensorsThermal SensorsSelf-testSelf-test ArchitectureSelf-test MechanismsSelf-testing CircuitsThermal Flow Sensors
A 2-D smart flow sensor with self-testing function was designed, fabricated and tested in this paper. It is composed of cross-structure heaters and four symmetrically located sensing parts. When the flow angle changes in the clockwise direction, the temperature differences among the four parts, namely Mode 1 given by T <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">13</sub> (T <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">24</sub> ) and Model 2 given by T <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">12</sub> (T <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">14</sub> ) will be Sine(Cosine) functions of wind direction. Further study shows that the magnitude of mode 1 is 1.414 times that of Mode 2, and the phase of Mode 2 leads Mode 1 by 45°. By using the fixed phase gap between the two modes, the self-test function can be realized without additional components. In order to achieve a high sensitivity and robust sensor, thermal insulated substrate was introduced to fabricate calorimetric flow sensor instead of silicon wafers. The proposed sensor was fabricated on the Pyrex7740 substrate using single liftoff process. Finally, a wind tunnel test was carried out in constant power (CP) mode, and the test results show reasonable agreement with the simulation curves.
15
Multi-range silicon micromachined flow sensor
N. Sabaté, J. Santander, L. Fonseca et al. · Sensors and Actuators A Physical · 2003 · 131 citations
Engineering, Electrical Engineering, Mechanical Engineering +14