Applied Physics Letters · 1986 · 44 citations · 8 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsAmorphous SemiconductorsDefects In Electronic MaterialsDislocations In SemiconductorsIon ImplantationMicrostructure EvolutionTransmission Electron MicroscopyAmorphous RegionsAnnealing Temperature EffectsImplantation-induced Defect FormationIon Implantation EffectsPost-implantation AnnealingPrecipitatesSecondary Ion Mass SpectrometryTransmission Electron Microscopy Of Dislocations
Aluminum implantation into (100) Si has been studied here by transmission electron microscopy (TEM), secondary ion mass spectrometry, and spreading resistance methods. For the implantation conditions (2×1015 cm−2, 200 keV, room temperature) used in our experiments a buried amorphous layer is created from 50 to 300 nm below the surface. During N2 annealing at 600–1000 °C, two discrete layers of dislocations at (110 and 330 nm) bounding a band of precipitates (>1011 cm−2) were created, accompanied by a pronounced redistribution of Al in the implanted region. Three Al peaks at depths corresponding to the defect layers observed by TEM appeared. The positions and number of the peaks remained almost unaffected as a function of annealing temperature. High resolution TEM showed that the band of precipitate contained oriented Al particles and that these particles also nucleated on dislocations. The stability of the Al peak and associated low electrical activity (<10%) has been explained by taking into account the formation of Al precipitates and their interaction with the oxygen in the surrounding regions.
8
Electrical Behavior of Group III and V Implanted Dopants in Silicon
R. Baron, G. A. Shifrin, O. J. Marsh et al. · Journal of Applied Physics · 1969 · 155 citations