Journal of Applied Physics · 1993 · 35 citations · 21 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor MaterialsThin FilmsChemical Vapor DepositionEpitaxial GrowthSemiconductor SurfacesSemiconductor Thin FilmsThin-film DepositionThin-film MaterialsEpitaxial Film GrowthEpitaxial Film MorphologyEpitaxial Thin FilmsFerroelectric Thin FilmsMetalorganic Chemical Vapor DepositionThin Film FerroelectricsThin-film Growth MechanismsX-ray Diffraction Analysis
Ferroelectric BaTiO3 thin films were grown on Si(100) substrates at a temperature of 600 °C by in situ metalorganic chemical vapor deposition. X-ray diffraction and transmission electron microscopy results suggested that the 〈110〉 direction of the BaTiO3 preferred oriented films is parallel with the (100) direction of the Si substrates. Auger electron spectroscopy measurements showed that the compositions of the as-grown films were with a uniform distribution throughout the thickness of the films and with a sharp interface. These results indicate that the failure to obtain BaTiO3 epitaxial films was due to the formation of an interfacial amorphous layer prior to the creation of the films.
21
Metalorganic chemical vapor deposition of BaTiO3 thin films
B. S. Kwak, K. Zhang, E. P. Boyd et al. · Journal of Applied Physics · 1991 · 157 citations
Natural Sciences, Materials Engineering, Materials Science +16